• September 27, 2022

Points to consider Whenever Selecting LED Strip Lights

In a prior article we dedicated to the key items to be aware of when buying LED Strip Lights for the very first time. Now we are likely to take you through another phase; installation. Installing your LED Strips may be anything from very simple to quite difficult, but ultimately it will depend on which outcome you are attempting to achieve along with your lighting system. For instance, introducing a 1 metre strip of LED lighting into your kitchen cabinet might be a lot more self-explanatory than using 20 metres of RGB LED Strip Lights to outfit a club and run this on DMX Control. Regardless of what you do there are a few universal items to be aware of and this informative article will take you through a number of them.

We will begin with the LED Tape itself. This includes a long bit of high impact, flexible circuit board with surface mounted devices, or SMDs, positioned along its length LED driver. There are a few different items to consider here including, LEDs per metre, LED chip size, strip light colour and length. Strip Lights can be found in two LED per metre varieties, 30 LED per metre and 60 LED per metre. As suggested by the name the latter has twice as many LEDs and is a lot brighter compared to the former. They are designed to be utilized in a lighting context where they’re forced to contend with background illumination. So for example if you wish to utilize them in a daylight setting, like a shop street display, or add them to a space that already has general illumination and still want them to be viewed, you must opt for 60 LED per metre as their sharper light output makes them suitable for these purposes. Besides this a 30 LED per metre strip will have a way to take care of most other lighting arrangements, such as for instance club setups, or anywhere else they don’t have to contend with background lighting.

When you go through the specifications of strip lighting you will often notice some four numbers that to most people might not mean a lot. These actually refer to how big is the average person LEDs on the strips. Typically you will see chip sizes of either 5050 (5mm by 5mm) or 3528 (3.5mm by 2.8mm). The main element difference between both of these types of chip size could be the consistency of light they produce. Smaller LEDs will generate a far more jagged and inconsistent effect, while larger LEDs provides a far more even spread of light.

Another decision to produce is exactly what colour strip light you wish to buy. They are usually available in three main colour varieties, including warm and cool white and interchangeable RGB. The former two are for adding stylish ambient lighting to commercial and domestic settings while avoiding being too garish with the conclusion result. They can be used to aesthetically to enhance the appearance of a space by the addition of layered or accent lighting, or they could add functionality to kitchens, bathrooms or offices where they can be used as task lighting to help work. RGB LED is just a direct replacement old fashioned disco lighting and offers tens and thousands of programmable effects. Typically they will run directly from a remote control which works in conjunction with a red eye sensor attached between the strip light and transformer. However, DMX Control can be an option. This is a type of advanced effects programming that uses an industry standard signal to control the brightness, colour and frequency of the lights.

Probably the most obvious consideration to produce is the actual period of strip lighting that you require. This depends on the type of your setup and how complex your intentions are. Usually most lighting arrangements can be performed with an individual strip. Strip Lights can be found in 5 metre and 10 metre reels as standard, but longer or shorter bespoke lengths may be ordered so call your provider to find out. Lengthening or shortening strip lighting can be done all by yourself as well. To shorten a reel light can be done simply by cutting the strip at one of its cutting points spaced approximately 5cm apart along the length of the light. To attach two items of strip together, and thereby increase the length of the light, you will require a soldering iron and some two core wire. Simply solder these wires to their respective plus and minus solder points by the end of the strip light where the cut has been made and do the same on another strip to complete the connection. This process can be used to achieve a little bit of extra length, particularly when trailing them around a large corner.

This article has given you a few of the main specifications related to LED Strip Lighting and how to ensure you obtain precisely the right light you wish for the purposes. Be aware of additional articles on how to be sure you meet the power requirements of your lighting system.

Leave a Reply

Your email address will not be published.